Directions to Accu-Med Services Office in Milford, Ohio
513-831-1207 or 800-777-9141

From the Greater Cincinnati and Northern Kentucky International Airport
Follow the airport exit roads to I-275, and go east on I-275. You will stay on I-275 for about 25 miles, crossing from Kentucky into Ohio. Go past the exit for Route 32, then take the next exit (#59B) for Route 50 East to Hillsboro. Follow the exit ramp down to the first stoplight at Route 50, and turn right on Route 50. Go about 1/4 mile to the first light at TechneCenter Drive, and turn left. Go one block and turn into the first driveway on the right, then look for building #300 on the left side of the driveway. Enter building 300 in the center of the building.

From the South
Follow I-75 north to I-275, and go east on I-275. You will stay on I-275 for about 21 miles, crossing from Kentucky into Ohio. Go past the exit for Route 32, then take the next exit (#59B) for Route 50 East to Hillsboro. Follow the exit ramp down to the first stoplight at Route 50, and turn right on Route 50. Go about 1/4 mile to the first light at TechneCenter Drive, and turn left. Go one block and turn into the first driveway on the right, then look for building #300 on the left side of the driveway. Enter building 300 in the center of the building.

From the North
Take I-75 south or I-71 south to the Cincinnati area. As you approach the north side of Cincinnati, take I-275 east. You will go about 15 miles on I-275. Go past the exit for Route 28 Milford, and take the next exit (#59B) for Route 50 Hillsboro and Milford Parkway. Once on the exit ramp, bear to the left for Route 50 Hillsboro. The ramp will make a loop and you will merge onto Milford Parkway heading east. Proceed to the first stoplight at Route 50, and turn right on Route 50. Go about 1/4 mile to the first light at TechneCenter Drive, and turn left. Go one block and turn into the first driveway on the right, then look for building #300 on the left side of the driveway. Enter building 300 in the center of the building.

From the East
Follow State Route 125 or State Route 32 west to I-275. Go north on I-275 to the exit (#59B) for Route 50 East to Hillsboro. Follow the exit ramp down to the first stoplight at Route 50, and turn right on Route 50. Go about 1/4 mile to the first light at TechneCenter Drive, and turn left. Go one block and turn into the first driveway on the right, then look for building #300 on the left side of the driveway. Enter building 300 in the center of the building.

From the West
Take I-74 east to the Cincinnati area. Follow the signs very carefully to get onto I-275 East and remain on I-275 East. Continue for about 30 miles past the exit for Route 28 Milford, and take the next exit (#59B) for Route 50 Hillsboro and Milford Parkway. Once on the exit ramp, bear to the left for Route 50 Hillsboro. The ramp will make a loop and you will merge onto Milford Parkway heading east. Proceed to the first stoplight at Route 50, and turn right on Route 50. Go about 1/4 mile to the first light at TechneCenter Drive, and turn left. Go one block and turn into the first driveway on the right, then look for building #300 on the left side of the driveway. Enter building 300 in the center of the building.